Jump to content

WWCephas GB Mission group file repository


WWCephas
 Share

Recommended Posts

I thought I would make a single post thread that contains my go to Mission Editor groups that make mission building so much easier by just dragging and dropping a file in.  

If you ever get the itch to start making your own missions this will make it much easier to get started, and most are easy to tweak to change nationalities, waypoint alt & loc., etc.

Also if anyone wants help with a custom Mission Editor group creation they thought of let me know.

(DISCLAIMER- These have all been game tested but there is no guarantee there are not small errors that need fixing from time to time.  I will update them as the bugs crop up)

To keep this thread organized please do not post on this thread, send me a Private Message or start a new thread about a question or request.  THANKS!

 

 

Edited by WWCephas
Link to comment
Share on other sites

BUGFIX AND FEATURE UPDATE 9/21/21

VARIABLE STRENGTH, RANDOM DIRECTION, FIGHTER CAP PATROL

 

VARIABLE STRENGTH, RANDOM DIRECTION, FIGHTER CAP PATROL.zip

 

This is one of my go to favorites for adding enemy fighter cover. 

THIS .GRP FEATURES:

This .grp file creates a flight of 1-4 fighters that will fly in one of 2 triangular patrol patterns in either direction.

It is somewhat complex but only requires a single input to activate after dropping and placing where desired on the map.

This also features RANDOM AI SKILL LEVEL for the fighters (the Lead is always an Ace), as well as ENHANCED AI RETREAT routines.  (Retreat triggers = Bingo, Winchester, high damage, pilot wounded)

The fighters all air start immediately after the required time delay after the first player spawns (7 min), and begin their patrol.

They will attack any air enemy within visual distance.

If a retreat is triggered they will individually head for the escape waypoint (where they de-spawn) at high speed if they can break engagement.

When the entire squadron has retreated or been killed a new squadron will generate after a random delay. 

TO INSTALL:

This .grp file requires an "On Spawn" input from the players airfield to begin activation, there is another input for deactivation if desired.

Select the entire group and move it over the area of the map you desire to patrol.  The patrol currently looks like a 2ix pointed star of waypoints.

Drag and drop around selected waypoint locations to grab all the waypoints at that location and move them as desired.

Change altitude of spawn location and patrol waypoints as needed.

NOTES:

To change the altitude of waypoints you will need to zoom way in as each will appear as a single WP unless zoomed in.  Also be sure to leave a 50m stagger in altitude between planes in each WP grouping. (2000, 2050,2100,2200)

Each plane is a single entity and they are not targeted to the Lead, but they still fly formation very well.  This enables each plane to have its won separate AI functions.

The file as shared is for a FW190 A5 flight patrolling at 1K meters.  To change plane type and nationality you only need to select the 4 planes and modify their attributes.

This patrol as built will sweep a roughly 50Km diameter circular area leaving no gaps in patrol detection within that area.

Edited by WWCephas
Link to comment
Share on other sites

AXIS ACTIVE AIRBASE- VARIABLE STRENGTH FIGHTER SCRAMBLE, AAA DEFENSE

AXIS ACTIVE AIRBASE- VARIABLE.zip

 

Here is another one of my favorites.  This file is a bit more complex to place on the map but adds a lot of functionality and realism to a mission.

THIS .GRP FEATURES:

Variable strength fighters that spawn in when an enemy is detected within range.  Their is a random delay  in the reaction time giving the attacker a chance of catching them on the ground.

Variable difficulty scoring for base suppression.

The fighters are random experience (Less the flight lead Ace), and if the enemy is already overhead when respawning they will skip the random start delay.   (Emergency scramble)

Once airborne the fighters will engage any enemy within visual sight or patrol for 15 minutes in the vicinity of the base before heading to the de-spawn waypoint.

The fighters have ENHANCED AI ROUTINES and will try to break and escape if triggered.  The fighters will de-spawn if they manage to escape.

There is a separate function for a single fighter that taxis from a random hangar to take off and join the fight to put more life on the field.  (the large group does not taxi due to server load)

The airbase will become SUPPRESSED if a variable number of planes are killed in the air and on the ground.  When suppressed all scrambling aircraft will no longer spawn.  AAA will still function though.

The airbase will become DESTROYED if it is leveled and all AA is eliminated, it will pose no threat.  (Adding a base capture routine for paratroopers would be easy)

Map icons update as base status changes.

TO INSTALL:

Place the .grp over an existing airbase on the map.  Try to place the Airbase spawn item directly over the center of the map icon in map view.

Move and rotate as necessary the group of 4 scramble fighters to the main runway.

Set the takeoff WP just past the end of the runway.  (rotate all 4 WP together as necessary to lineup with scramble fighters)

Place ground static airplanes in revetments or near hangars as desired.  Place trucks near fuel tanks or small buildings.

Place the mobile AA vehicles where they can drive back and forth between waypoints without hitting objects.

Highlight and select each AAA emplacement and place at the corners of the field where appropriate.

Provide a link from the Player spawn airfield(s) to the "On Spawn" input link.

To make the Taxiing scramble plane work correctly requires a little more work:

1.  Set the Airfield Entity heading to match the main runway of the map airfield.

2. Select "Edit Chart" on the airfield properties.  Adjust the taxi and runway waypoints as necessary to match the current field layout.

3. Place the three hangars with 3 planes in them in an appropriate place on the field near the initial taxi waypoint set above.

4.  The first taxi way point should be directly in front of the middle hangar and about 100 yds. ahead of it.

5.  It may require some trial and error to make all 3 hangars spawn and taxi correctly.  You can just delete the outer two hangars and delete the random spawn circuit so it only spawns from one hangar if it causes too many problems.

NOTES:

If you try to change nationality be sure to change the checkzone detection inputs as well and all the static items.

There is a checkzone for enemy detection.  It is currently timed for the random delays and is set to 16000 meters.  Some planes start slower than others and may require tweaking for reaction times.

There is a separate checkzone for the taxi scramble fighter set to 4k meters to be sure the enemy is actually coming close to the airfield before starting.

Edited by WWCephas
Link to comment
Share on other sites

G4 FIGHTER WALL

G4 Fighter Wall.zip

This is a simple routine I just thought up that creates a wall of fighters to discourage enemy from chasing a fleeing enemy or to enforce area denial.

THIS .GRP FEATURES:

4 Fighters that will spawn on start and fly to a location and take up a tight patrol cover about 20km wide.

Fighters will take turns flying back for refuel (despawn/respawn) so there will always be at least 3 on station.

Fighters have random AI experience less the Lead (Ace), there are ENHANCED AI routines, but it is not tied to experience at this time.

The fighters will try to remain on station and should not chase players too far if they attempts to run.

TO INSTALL:

Import onto map and drag and drop entire group where desired.

Place the scramble fighters on a nearby airfield ensuring the planes are lined up with the runway.

Set the 1st waypoint and attack areas where needed to block access.

NOTES:

Currently set to start when the map starts.

Very easy to convert planes and nationality.

The planes are currently set to End WP and despawn halfway back to base to save time.

Convert the planes to air start if your mission is heavy on resources.

Edited by WWCephas
Link to comment
Share on other sites

Axis Large Factory Variable Difficulty

Axis Large Factory Variable Difficulty.zip

This file is an easy way to add objectives to a map and scales in difficulty well.  It can also be converted for a myriad of other uses.

THIS .GRP FEATURES:

Variable difficulty dependent on the number of players

AAA built in

Auto updating map icons.

Can easily be converted to a refinery or other facility by changing building entities.

TO INSTALL:

Import onto map and drag and drop entire group where desired.

It can be placed in an open field but looks better in a city setting.  Delete existing city building entities and arrange this factory as desired in that location.

Place AAA and mobile AA vehicles where appropriate.

Provide a link from the Player spawn airfield(s) to the "On Spawn" input link.

NOTES:

Switching nationality is relatively easy, but be sure to change the buildings as well.  Defensive emplacements around guns are "Neutral" and do not need to be changed.

The Factory icon disappears when fully destroyed, but it generated a "Factory Destroyed" text message in game.

The factories are modular so you can remove them and the associated controlling MCU links for that factory block or copy and paste and add more, but be sure to update the destroyed counters to match the new values.

If you change a building entity be sure it has at least 6 buildings that can be destroyed,  The variable difficulty changes the number of the counted kills in a factory block before triggering a "Command Damage" for the entire block and then count that block as killed for overall destruction scoring.

This example is made up of 12 blocks.

There are smoke stack effects located on the blocks that have stacks, these will turn off when damaged.

If you change buildings you may want to adjust the damage value in that buildings property.  (Anything over 2000 damage and 20mm cannons can hardly hurt it)

A factory block might actually have a possibility of 6-40 kill messages generated for full destruction,  This routine eliminates that variance and gives a single output for the whole block.

This routine also helps eliminate concurrent destruction not being counted, although that is still a possibility, so it is best to keep your "Fully Destroyed" kill counter set to 70-80% of the total number of blocks as insurance.

At that level of destruction it looks pretty well destroyed and in real life it would be technically destroyed as well and unable to produce anything.

Edited by WWCephas
Link to comment
Share on other sites

Random AI Ground Attack

Random AI Ground Attack.zip

This file is for adding an attack plane group for AI that will hit random targets.  The unit will respawn infinitely and the targets will regenerate as well.  This works well for adding atmosphere to missions with a low server overhead.

Alternately this can be easily modded into an enemy objective that can be shut off after reaching a certain number of intercept/kills.

THIS .GRP FEATURES:

2 Attack aircraft (2 PE-2s in this instance)

3 random attack locations with targets that respawn every 7 minutes

Random time delay between flights.

Fixed low AI (for tail gunners) but with ENHANCED AI RETREAT routines.

Standalone installation requiring no external inputs and auto starting and respawning.

TO INSTALL:

Import onto map and drag and drop entire group where desired.

Highlight target groups and move over likely locations then hand pick each target vehicle where you want it on the map.

Move the airplanes to where you want to them to spawn and make sure they are headed in a direction roughly in the middle of the three different target locations.

Move the END WAYPOINTS together as a group to where you want them to retreat to.  Generally just behind where they air spawned is good.

Ensure plane type, nationality and loadouts are what you want them to be.  (Don't forget the targets too, they can be any vehicle or enemy nation as well)

NOTES:

There is a input link to shut off the respawn if you have an external trigger you want to link to it.

You can change the bombers to a fighter with a big gun like a Yak9T (do not install bombs if you want it to use the gun only or you will need to remove the "On Bingo Bombs" output link on both planes or else the planes will retreat after dropping bombs without using their guns)

Edited by WWCephas
Link to comment
Share on other sites

  • WWCephas changed the title to WWCephas GB Mission group file repository
  • WWSandMan pinned this topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...

Important Information

Please confirm you have read and understand the rules above